Hanna Instruments edge EC HI2003, Manual

Page: 12 / 39

Setup/Installation 12
Option Description Choices Default Basic mode
Set Auto Off
Used to save
battery life by
automatically
turning off when
no key press is
detected for
time set and
meter is not in
active logging or
calibration mode.
5, 10, 30, 60
Min
or Off
10 min Available
Sound
If enabled, a
short audible
tone is produced
for key stroke
or calibration
confi rmation and
a longer tone for
wrong key.
On or Off On Available
Temperature
Unit
Select degree
Celsius or
Fahrenheit scale
for displayed
and logged
temperatures.
ºC or ºF ºC Available
LCD Contrast
Permits
modifi cation
of the display
contrast for
various lighting
conditions.
1 to 8 3 Available
Flash Format*
Only seen when
log errors are
present.
Permits
formatting the
fl ash drive.
On or Off Off Available
Message
Transition
User may choose
how messages
are displayed on
third LCD line of
display.
Word scroll
messages or
letter scroll
messages
Letter scroll
messages
Available
Reset Confi g To
Default Press the MODIFY key and CFM (when prompted) to
reset parameters.
Available:
RESETS with
Basic Mode OFF.
Instrument
Firmware/ Probe
Firmware
Displays fi rmware
version of meter.
Using the
u
key switches to
Probe fi rmware
(if connected)
and diagnostic
mode for
troubleshooting.
View only
Current
fi rmware
version.
Available
Meter ID/
Meter SN/
Probe SN
User ID and
Serial Number of
meter and probe
(if connected).
Use
u
to
change between
the three
parameters.
Meter ID is user
selectable 0000/ Serial
Number
Available
*Note : Options that are seen under special conditions only.
General
Setup