Setup/Installation
16
If no data was logged for the selected measurement
range, the instrument displays the following
messages:
•
“NO MANUAL LOGS”
•
“NO STABILITY LOGS”
Press
CFM
to enter inside lot information to view recorded data.
Use the
ARROW
keys to toggle between diff erent records.
Use
u
to display GLP data including calibration information, date, time, etc.
Press
CLR
then
CFM
when deleting records or lots.
Press
RCL
to exit the logging type.
Press
RCL
to return to the measurement screen.
Delete Logging Type/Lot
Press
RCL
followed by CFM.
Use the
pq
keys to select the Manual/Stability records or Interval lots to delete.
Press
CLR
. The instrument will display “CLEAR MANUAL” for Manual Records,
“CLEAR STAB” for Stability Records.
For Interval lots, the message “CLEAR”, followed by the
selected lot will be displayed with “CFM” tag blinking.
Press the
pq
keys to select a diff erent lot. Press
CFM
.
The instrument will display “PLEASE WAIT”.
“CLEAR DONE” is displayed for a few seconds after the
selected Interval lot is deleted.
Delete Records (Manual and Stability log on demand)
To delete individual records (Manual and Stability logs only), enter Manual
(Stability) log by pressing
CFM
when Manual (Stability) is displayed. Use the
ARROW keys to select the record to be deleted and then press
CLR
.
The instrument will display “CLEAR REC.“ and record
number along with “CFM” tag blinking. Use the ARROW
keys to select another record if necessary.
Viewing
Logged
Data
Summary of Contents for edge DO
Page 1: ...DO...