manualshive.com logo in svg

Hanlong Unicorn 3112, User Manual

Share
Download
Hanlong Unicorn 3112 User Manual Download Page 41

                        Unicorn 3112 User Manual

 

Copyright © 2008 

Hanlong Technology Co., Ltd

 

                                     Page 41 of 42 

6.2. Configuring Unicorn 3112 via Voice Prompt 

6.2.1. DHCP Mode 

Follow section 5.1 with voice menu option 01 to enable Unicorn 3112 to use DHCP 

6.2.2. Static IP Mode 

Follow section 5.1 with voice menu option 01 to enable Unicorn 3112 to use STATIC IP 

mode, then use option 02, 03, 04 to set up Unicorn 3112’s IP, Subnet Mask, Gateway 

respectively. 

6.2.3. Configuration through a Central Server 

Unicorn 3112 devices can be automatically configured from a central provisioning system. 

When Unicorn 3112 boots up, it will send TFTP or HTTP request to download 

configuration files. There are two configuration files, one is “cfg.txt” and the other 

is“cfg001fc1xxxxxx”, where “001fc1xxxxxx” is the MAC address of the Unicorn 3112. 

For more information regarding configuration file format, please refer to the

  related 

technical documentation. 

The configuration file can be downloaded via TFTP or HTTP from the central server. A 

service provider or an enterprise with large deployment of Unicorn 3112s can easily 

manage the configuration and service provisioning of individual devices remotely and 

automatically from a central server. The central provisioning system uses enhanced (NAT 

friendly) TFTP or HTTP (thus no NAT issues) and other communication protocols to 

communicate with each individual Unicorn 3112 for firmware upgrade, etc.   

7.

 

SOFTWARE UPGRADE 

To upgrade software, Unicorn 3112 can be configured with a TFTP server where the new 

code image is located. The TFTP upgrade can work in either static IP or DHCP mode 

using private or public IP address. It is recommended to set the TFTP server address in 

either a public IP address or on the same LAN with the Unicorn 3112. 

There are two ways to set up the TFTP server to upgrade the firmware, namely through 

voice menu prompt or via the Unicorn 3112’s Web configuration interface. To configure 

the TFTP server via voice prompt, follow section 5.1 with option 06, once set up the TFTP 

IP address, power cycle the ATA, the firmware will be fetched once the ATA boots up. 

To configure the TFTP server via the Web configuration interface, open up your browser to 

Summary of Contents for Unicorn 3112











































Reviews:

No comments

Brands by name

Popular brands

Load more brands