Unicorn 3112 User Manual
Copyright © 2008
Hanlong Technology Co., Ltd
Page 17 of 42
End User Password for access to Basic User Options:
1234
6.1.6. End User Settings:
After a correct password is entered in the login screen, the embedded web server inside
the Unicorn 3112 will show the configuration page, which is explained in details below:
6.1.6.1
Device Status:
DEVICE STATUS SETTING
Setting Options
Meaning
MAC Address
The device ID, in HEX format. This is a very important ID
for ISP troubleshooting.
WAN IP Address
There are 2 modes under which the Unicorn 3112 can
operate:
- If DHCP mode is enabled, then all the field values for the
Static IP mode are not used (even though they are still
saved in the chipset's memory). The Unicorn 3112 will
acquire its IP address from the first DHCP server it
discovers from the office/home network it is connected to.
To use the PPPoE feature, the PPPoE account settings
need to be set. The Unicorn 3112 will attempt to establish
a PPPoE session if any of the PPPoE fields have been
entered with data.
- If Static IP mode is enabled, then the IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary),
DNS Server 2 (secondary) fields will need to be configured
by the user. These fields are reset to zero by default.
Product Model
This field contains the product model info, such as Unicorn
3112
Software Version
Program: This is the main software release. Boot and
