Unicorn3002
User Manual
Copyright © 2008
Hanlong Technology Co., Ltd
Page 7 of 31
Address
address. Enter 12 digit new IP address.
15
Upgrade Protocol
Upgrade protocol for firmware and
configuration update.
Enter “9” to toggle between TFTP and
HTTP
16
Firmware Version
Firmware version information.
17
Firmware Upgrade
Firmware upgrade mode. Enter “9” to
rotate among the following three options:
1. always check
2. check when pre/suffix changes
3. never upgrade
47
“Direct IP Calling”
Enter the target IP address to make a
direct IP call, after dial tone. (See “Make
a Direct IP Call”.)
99
“RESET”
Enter “9” to reboot the device; or
Enter MAC address to restore factory
default setting (See Restore Factory
Default Setting section)
“Invalid Entry”
Automatically returns to Main Menu
Other Menu Prompt Features:
¾
By pressing “***” on the analog telephone, you can access the voice menu.
¾
“*” shifts down to the next menu option.
¾
“#” returns to the main menu.
¾
“9” functions as the ENTER key in many cases to confirm an option.
¾
All entered digit sequences have known lengths-2 digits for menu option and 12
digits for IP address. Once all of the digits are collected, the input will be processed.
¾
Incorrect keyed entry cannot be deleted or undone. The Unicorn 3002 will prompt you to
start over by telling you that you made an error.
5.2.
Make Phone call
5.2.1.
Calling Phone or Extension Numbers
¾
Dial the number directly and wait for 4 seconds (Default is 4 seconds. To change the
default, change the settings via the web configuration page under “No Key Entry
Timeout”). Or
¾
Dial the number directly, and press # (assuming that “Use # as Dial Key” is set to “YES”
during web configuration of your Unicorn 3002).
Other functions available during the call are call-waiting/flash, call-transfer, and call-
forward. Your SIP gatekeeper/proxy server needs to support these features in order for
them to work.
5.2.2. Call Hold
While in conversation, pressing the “FLASH” button on the attached phone will put the
remote end on hold. Pressing the “FLASH” button again will release the previously Hold
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-3002
