Hanlon 56836, Instruction Manual, Page: 10 / 16

10
model no. 56836
ASSEMBL
Y
CROSSBEAM AND SHELF STRAP INSTRUCTIONS
STEP 4
• Continue assembly by installing the top set of crossbeams to the
upright frames. Make sure the crossbeams are attached at the
same level on both sides. If you plan to stack two Kitchen Racks
together, then DO NOT attach the top set of crossbeams to the
very top of the upright frames.
SEE PAGE 13 FOR COMPLETE STACKING INSTRUCTIONS.
STEP 5
• Place a shelf strap between the lowest set of crossbeams (there
is a pre-drilled hole at the center of each crossbeam). Align the
holes, and use a carriage bolt and nut to fasten the shelf strap
to the crossbeams. Use the wrench to tighten completely. To
ensure the carriage bolt doesn’t stick out after assembly, feed
it up through the bottom of the holes and secure the nut to the
top of the shelf strap.
STEP 6
• For the top set of crossbeams, attach one end of the shelf strap
to the crossbeam that will be facing outwards (the front of the
rack). Before attaching the free end to the crossbeam closest to
the wall, you must first attach the wall mount bracket.
SEE PAGE 11 FOR MOUNTING INSTRUCTIONS.