User's Manual of Fiber Laser Chiller
20
7.5.2 LCD controller parameter setting
①
, Quick change of set temperature
If the user parameter [Lock Temperature] is set to "No", the set temperature can be changed
directly in the main interface.
degrees, operating as follows:
[Remark 1]: The set temperature can also be modified in the user parameters.
[Note 2]: When changing the set temperature in dual temperature mode, press the
key to
switch between low temperature water/ambient water
Set the temperature.
②、
Inquiry/Reset Fault
When a fault occurs, an alarm appears in the main interface and the fault is queried and reset
as follows:
8 Maintenance
The equipment must be stopped and cut off after 3 minutes for maintenance, otherwise there
is a risk of electric shock. When the ambient temperature is below 2°C, the internal water must be
drained when the machine is shut down for a long time.
8.1 Dust control in summer
During the summer months, please dust and clean the condenser and dus+creen of the
equipment in about 15 days, as shown in Figure
Blow it with
compressed air
Blow it with
compressed air
Wash and dry
Wash and dry
Figure 11 Dust screen cleaning and dust removal process
Dustproof
mesh