2
E
N
G
L
I
S
H
1. PRESSURIZED DEVICES:
This equipment is a pressure containing device. Do
not exceed maximum operating pressure as shown
on equipment serial number tag. Make sure equip-
ment is depressurized before working on or disas-
sembling it for service.
GENERAL SAFETY INFORMATION
2. ELECTRICAL:
This equipment requires electricity to operate.
Install equipment in compliance with all applicable
electrical codes.
Standard equipment is supplied with electrical enclo-
sures not intended for installation in hazardous
environments.
Disconnect power supply to equipment when per-
forming any electrical service work.
A. RECEIVING
This shipment has been thoroughly checked, packed
and inspected before leaving our plant. It was re-
ceived in good condition by the carrier and was so
acknowledged.
Check for Visible Loss or Damage.
If this shipment shows evidence of loss or damage at
time of delivery to you, insist that a notation of this
loss or damage be made on the delivery receipt by
the carrier’s agent.
B. UNPACKING
Check for Concealed Loss or Damage.
When a shipment has been delivered to you in
apparent good order, but concealed damage is
found uponunpacking, notify the carrier immediately
and insist on his agent inspecting the shipment.
Concealed damage claims are not our responsibility
as our terms are F.O.B. point of shipment.
C. MOVING
In moving or transporting dryer, do not tip dryer
onto its side.
D. STORAGE
Important - Do not store dryer in temperatures
above 130
°
F, 54.4
°
C.
3. BREATHING AIR:
Air treated by this equipment may not be suitable
for breathing without further purification.
Refer to applicable standards and specifications
for the requirements for breathing quality air.
RECEIVING, MOVING, AND UNPACKING
