NOTE:
Wipe clean the surface where the flood sensor will be mounted.
Any dust and particles can reduce the adhesion of double-sided mounting
tape.
Ⅲ
. ADDING/REMOVING THE DEVICE
Included as a secure device (S0 or S2)
1) Open the cover.
2) Place the device within the direct range of your Z-Wave controller.
3) Set the main controller in security add mode (see the controller’s manual).
4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast
in blue.
1) Wait for the adding process to end.
2) Successful adding will be confirmed by the Z-Wave controller’s message.
NOTE
If you want your
flood sensor
to be a security device that use secu
re/encrypted message to communicate in a Z-Wave network, then a s
!
！
