Hanin TP808-i, User Manual

Page: 23 / 123

TP808-i User Manual
19
2) Wi-Fi
●
Protocol: IEEE 802.11n b/g/n, up to 150Mbps
●
Connection method:
Printer Wi-Fi factory default is AP mode, which IP address is 192.168.100.1 and SSID is
TP808i_AP .
After the PC or mobile devices be connected to printer successfully, users can enter the website
by clicking the link below or scanning the OR Code on the self-test to set parameters.
Link : http://192.168.100.1/
User name : defined by user for the first time login
Password : the default password is empty. It is set by the user.
It requires to enter the user name and password only when clicking on the link.
Note: This setting is only available for models with Wi-Fi.
● Printing the WIFI information:
① Shortly press the power button 3 times, then the printer starts printing the WI-FI parameters
information.
② Shortly press the power button 5 times, then the printer will restore WIFI parameters
information (Restore to AP mode). The printer automatically restarts and the boot time is 2~3
seconds.
Status LED
Power on-Be ready Constant light
Fail to be ready
Fast flash
After exiting configuration mode, the printing
indicates that the WIFI configuration failed and the
LED is constant light.
No device connected Constant light
Equipment connected or connected
successfully means it is in working status
Slowly flash
Device disconnect or device connection
unsuccessful
Constant light