Hanil T04, User Manual

Page: 20 / 24

6. Problem solving
Symptom Check list
If Lid is not closed, it will not work. Refer to [3.3 Lid Open] and
check the Lid status of the lamp and close the Lid well.
Check if there is any foreign substance on the lid clasp,
if there is, remove the foreign substance and close the lid.
If the installation position of the main body is unstable, check the
level of the main body and whether it is fixed, and re-install it
horizontally on a flat surface.
If the rotor installation is poor, check the exterior of the rotor after
removing the rotor and stop using the rotor immediately if there is
any damage. Also, if the mounting method is wrong, refer to [3.4
Rotor Mounting and Removal] to install the rotor correctly.
If the tube insertion is asymmetrical or the weight is not correct,
refer to [3.5 Mounting the sample tube] to check the tube weight
and insert it symmetrically.
Vibration and noise
appear during operation.
Lid does not open.
Lid does not close.
Does not work
No power
19 ihanil.com
When the power supply is interrupted, check the power plug
connection in [3.2 Power Connection].
If it is not resolved in a short time, open the lid manually by referring
to [4.7 Manual Lid Release in Emergency] for sample protection.
USER MANUAL T04
6.1 Checklist before reporting a malfunction
If there is a problem with the centrifuge, check the following before reaching to a service center.
Refer to [3.2 Power Connection] and check if the power plug
is removed.
T. +82-2-3472-0727 │ sales@ihanil.com │ www.ihanil.com