background image

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.

Before  performing  maintenance  or  service  on  the  Pool  Cleaner  please  ensure  the  power  is 
disconnected to avoid personal injury or property loss.

The Pool Cleaner is designed for use in swimming pools only. Any other use is prohibited and will 
void manufacturers' warranty.

Do not swim in the pool whilst the Pool Cleaner is in use in order to avoid personal injury.

Do not allow the Power Box to come in contact with water, and it is recommended to be placed in 
a shady, dry and ventilated area.

When in use, the Power Supply and Caddy Cart must remain 3 meters away from the edge of the 
pool.

Do not use the Pool  Cleaner if there is a chance of thunder storm to avoid personal injury.

Users  are  only  permitted  to  perform  maintenance  described  in  this  manual. Any  tampering  with 
the Motor Box or Power Supply will void the warranty.

Ensure the Pool  Cleaner is fully submerged before turning the Power Box on.

If the Pool  Cleaner is not going be used for a long time, make sure to disconnect the power, keep 
it clean and put it in a safe, dry, shaded and well-Ventilated area.

If the Pool  Cleaner stops working, please refer to 

 local distributor.

The  optimum  working  temperature  for  the  Pool  Cleaner  is  between10

and  32

,  avoid  direct 

sunlight when not in use.

The  Pool    Cleaner  is  suitable  for  the  swimming  pools  no 

deeper  than  3 

meters  or 

2.5

  meters   

when used with Floating Battery.
 
Lift the Pool  Cleaner out of the water using the robot handles, do not lift the iCleaner using the 
Floating Cable. Lifting via the cable voids warranty.

This appliance is not a toy, and must only be used by people who have read this manual and can 
operate the product safely.

The pool cleaner should be regularly inspected for debris around drive motors, wheels, and pump 
motor shaft.

If  the  power  supply  cable  is  damaged,  it  must  be  replaced  by  the  manufacturer,  or  its  service 
agents to preserve the warranty.

section 6 “

”. If you cannot find 

the root cause, please contact your

Troubleshooting

1 Safety Warnings

Please read this manual carefully before using the Pool  Cleaner.

-1-

Summary of Contents for ICH Roboter iCleaner-300/TSX





















Reviews: