HANGZHOU GAOYUE TECHNOLOGY CO., LTD.
4.4 Proper Shut Down and Care
(PIC.4.4.1)
(2) To Clean Pool Cleaner:
Remove the Filter Cartridges from the robot, and open, then clean the Filter cartridges thoroughly
(Be careful not to damage the filter mesh), finally reassemble the Filter cartridges and place back into
the Pool Cleaner.
(Note: When re-fitting the Fliter cartridges, please ensure the Filter cartridges fit securely into the base
of the pool cleaner.)
-8-
(PIC.4.4.2)
(1)The iCleaner will shut down at the
end of the cycle.Turn power off at the
wall socket, and disconnect the power lead.
Remove the floating cable from the side of
the power box.
Pull the Floating Cable slowly until the Handle emerges
from the water (Pic.4.4.1 ), and then pull the Pool
Cleaner out of the pool by its Handle.
To stop the iCleaner before the end of the cleaning
cycle. press “ ” on the remote or the power box.
