HANGIL CONTROL HCR-2216, User Manual

Page: 8 / 13

Remote Controller User's Manual HCT-2216/HCR-2216
ON ON
1 2 3 4 1 2 3 4
10 1
CHANNEL
Eg. Refer to the settings of the Channel Switch and frequency as below.
ON ON
1 2 3 4 1 2 3 4
5-2. Setup for the Address Code
The address Code must adjust the same code between the transmitter and the
receiver
10 1
CHANNEL
receiver.
Open the case of the transmitter and the receiver; see the Address Code
Switch is adjusted the same position.
ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4
100 10 1
ADDRESS
Eg. Refer to the settings of the Channel Switch and frequency as below.
ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
100 10 1
ADDRESS
Hangil Control Co., Ltd 8 2008-09-24