7
the covering 1/8" inside the line you marked on the wing (top
and bottom). Use care not to cut the balsawood, as this will
weaken the structure. You want a wood to wood joint so the
epoxy will adhere to the fuselage/wing joint securely.
Reinstall the wing into the fuselage. Once you are satisfied with
the fit of the wing to the fuselage, and are sure it is centered, mix
up approximately 1 ounce of 30-minute epoxy.
Step 5.
Apply the epoxy to both sides of the wing center, top
and bottom. To apply epoxy to top, slide wing off center and
apply epoxy from outside of fuselage on both sides. Slide the
wing back and forth to work epoxy into the joint of the
wing/fuselage.
Step 6.
Wipe away excess epoxy with rubbing alcohol and a
paper towel
Step 7.
Realign the wing as done in Step 3. Allow the epoxy to
cure completely before proceeding to the next step.
