26
Step 3.
Remove the mounts and drill four 1/8" holes at the
points you marked through the wood motor mount beams in
the fuselage.
Step 4.
Reposition the engine mounts on the fuselage to check
the fit.
Step 5.
Fasten the metal motor mounts into place with four of
the screws, washers, and locking nuts provided.
Step 6.
Place the engine on the motor mounts in the desired
position. It is helpful to have the prop and spinner installed at
this time to check the clearance. Using a pencil, carefully mark
the engine mount through the holes in the engine mount flange.
Remove the engine and drill four 1/8" holes where marked.
Step 7.
Secure the engine in place using the four remaining
screws, nuts, and washers.
Step 8.
Install the muffler per the instructions included with
the engine. Now install the fuel tubing. Connect the vent tube
from the fuel tank to the muffler nipple and the other tube from
the fuel tank to the carburetor nipple.
