40
Hangar 9 P-51D Mustang Sport 40 Assembly Manual
Step G
Use the endpoints of the radio to set the throw of the servo.
Slowly increase the throw from 0 until the throw is correct.
Make sure to set both the up and down throws for the servo.
Step 16
Locate the air tank mount. Note the narrow side of the mount
as the top of the mount.
Step 17
Place the mount in the fuselage. Pass it between the pushrod
linkages and turn it as shown in the photos. Do not glue the
mount in the fuselage.
Step 19
Cut a 6-inch (152mm) piece of air line and attach it to the air tank.
Step 20
Slide the air tank into the mount. It will take a little finesse to
get the tank fully in the mount.
Step 21
Use a small amount of medium CA to glue the tank mount
in the fuselage.
