34
Hangar 9 P-51D Mustang Sport 40 Assembly Manual
Step 21
Set the flap switch on the radio to the down flap position.
Use the endpoint travel to set the down flap position to
1-inch (25mm)
Step 22
Set the flap switch on the radio to the up flap position. Use
the endpoint travel to set the flap so it is aligned with the
trailing edge of the wing.
Step 23
Repeat Steps 10 through 22 to complete the servo installation.
Installing the Fixed Landing gear
Required Parts
Wing panel (right and left)
Main gear (right and left)
Strut mount (2)
3mm x 4mm setscrew (2)
#6 washer (8)
Tie-wrap (4)
Landing gear door (right and left)
6-32 x 1/2-inch socket head screw (8)
Required Tools and Adhesives
Threadlock
Silicone adhesive
Hex wrench: 1.5mm, 9/64-inch (included)
If you are planning on installing retracts in your model,
you can skip the Fixed Gear Installation and move to the
next section, Installing the Retracts.
Step 1
Locate the items necessary to install the fixed landing gear
for your model.
Step 2
Attach the 3
1
/
2
-inch (89mm) wheel to the main gear strut
using two 5mm wheel collars. Place a drop of light machine
oil on the axle so the wheel can rotate freely.
