16
Step 5.
Deflect the ailerons stick to full right. Hold it there
(easiest way to have your TX set to PCM: hold and then turn off
the TX). Hold the clevis on the outboard servo up to the horn and
note how the holes align. Turn the transmitter on and hold full
left aileron and again note how the holes align. The holes have to
line up nearly perfectly. If they don't line up perfectly, adjust the
horn length (distance out from the aileron) in or out a few turns,
and recheck. Repeat this process until it is nearly perfect at full
deflection in both stick directions and at neutral.
Step 6.
Attach the swivel clevis to the horn with the supplied
screw.
Section 5: Installing the Aileron Linkages
CONTINUED