For more information
www.haneco.com.au
1300 001 LED (533)
ART09122019
Remote Controller Specifications (SKYLUX-REMOTE)
KEY
FUNCTION
KEY
FUNCTION
Press for permanent ON/OFF.
Sensor function will be disabled, press
“AUTO” to resume normal sensor
operations.
Press to resume normal sensor
operations with previous
configurations.
Display current configurations.
Press to enter test mode for sensor
sensitivity (Hold time for 2s).
Stand-by period and daylight sensing
are disabled.
Press “AUTO” to resume normal
sensor operations.
Upload selected configurations to the
sensor.
Increase/Decrease setting conditions.
Navigate UP/DOWN.
Default: Disabled.
Daylight sensor set point.
When the ambient light level drops
below or exceeds the pre-set lux level,
the sensor will wait and monitor the
changes for 1 min before switching the
luminaire ON or OFF.
Navigate LEFT/RIGHT.
Confirm and save pre-set parameters.
Press for
factory reset.
Default:
Pre-set configurations can be updated
and saved within the four modes.
Power Supply
2 x AAA 1.5V Battery
Communication
940 nm Infrared Tx & Rx
Upload Range
Up to 15m (50ft.)
Dimensions
123 x 70 x 20 mm
Brightness
100%
Daylight sensor
Disabled
Sensitivity
100%
Stand-by dim
30%
Hold time
5 min
Stand-by period
60 min
