For more information
www.haneco.com.au
1300 001 LED (533)
ART05062019
1. Press “AUTO”.
2. Press “DISP” to show latest configurations.
3. Press
or
to enter settings. Navigate to the desired setting by
to select new parameters.
4. Press “OK” to confirm all parameters and save.
5. Aim at the luminaire and press “SEND” to upload new parameters. The luminaire will flicker ON and OFF once as confirmation.
1. Press “MODE 1, 2, 3 or 4”. The remote will display existing configurations.
2. Press
to select new parameters.
3. Press “OK” to confirm all parameters and save.
Sensor configuration
Configure new MODE
Default MODE
BRIGHTNESS
SENSITIVITY
HOLD TIME
DAYLIGHT SENSOR
STAND-BY DIM
STAND-BY PERIOD
MODE 1
100%
75%
5 min
Disabled
30%
30 min
MODE 2
70%
75%
1 min
Disabled
30%
+∞ (Permeant ON)
MODE 3
70%
75%
5 min
30LUX
30%
30 min
MODE 4
70%
75%
1 min
(30LUX/300LUX)
30%
+∞ (Permeant ON)
BRIGHTNESS
Default: 100%
Adjust the brightness during hold time:
70%, 80%, 90%, 100%
DAYLIGHT SENSOR
Default: Disabled
Lux level setting
:
Select 10lux, 20lux, 50lux, 100lux,
300lux, 500lux
Use current lux level as threshold
:
Select
Disable:
Select
to disable daylight sensor.
SENSITIVITY
Default: 100%
Adjust sensor sensitivity:
20%, 50%, 75%, 100%
HOLD TIME
Default: 5 min
The period the luminaire remains ON
when no presence is detected.
10s, 1min, 5min, 10min, 15min, 20min,
30min, 60min
STAND-BY DIM
Default: 30%
Adjust the stand-by dimming level:
0% (ON/OFF control), 10%, 30%, 50%
STAND-BY PERIOD
Default: 60 min
Select stand-by period:
+∞ (Permeant ON), 1min, 30min, 60min
