For more information
www.haneco.com.au
1300 001 LED
Art11102022
PAGE 4
MOTION SENSOR & REMOTE
HANECO LIGHTING USER GUIDE
HIGHBAY-MS + HIGHBAY-REMOTE
FOR SKYLUX-G4/SL/SP AND BENZINA-G2
Sensor Remote Controller
(HIGHBAY-REMOTE)
BUTTON FUNCTION
PERFORMANCE
ON/OFF
Turn ON or OFF the sensor.
MW/PIR
Exchange from Microwave detection to PIR detection,
for future use.
Reset
Press it to start detection programming; before pressing any
other buttons, the screen shows default programming (Detection
Area 100%, Holdtime 5S, Daylight Disable, Standby Dimming 10%,
Standby Period 0S)
Start
Press it before you try to memorize program into the remote;
After pressing it, S on the screen will blink and keeping blinking
while making the program.
Memory
Press it after programming, the blinking S will become a solid M,
that means the program has been well memorized.
Apply
Press it to deliver the preset program to the specific sensors;
every presswill make the whole screen blink gently.
Detection Area
Also known as “sensitivity”, 100% means the highest sensitivity
and longest distance. Press it, specific icon on the screen will
blink and press the + - buttons to adjust.
Hold Time
The period that light will stay illuminated 100% after no motion’s
detected; Press it, specific icon on the screen will blink and press
the +- buttons to adjust.
Daylight Threshold
The preset Lux level to compare with ambient brightness when
motion gets detected; Press it, specific icon on the screen will
blink and press the + - buttons to adjust.
Stand-by Period
The period after holdtime, during which the light keeps standby
dimming level; Press it, specific icon on the screen will blink and
press the + - buttons to adjust.
Stand-by Dimming
Level
After holdtime, the light will dim from 100% to optional
standby dimming levels; Press it, specific icon on the screen
will blink and press the + - buttons to adjust.
UP
The main functional buttons to adjust the factors to wanted level.
DOWN
POWER
Supports to manually change dimming output in detection mode;
Press it, specific icon on the screen will blink and press the + -
buttons to adjust.
Test Mode
Supports to check if the sensor works correctly with a short
2S holdtime;Press it and the holdtime will change to 2S, and it
can’t be memorized.
