For more information
www.haneco.com.au
1300 001 LED
Art11102022
PAGE 2
MOTION SENSOR & REMOTE
HANECO LIGHTING USER GUIDE
HIGHBAY-MS + HIGHBAY-REMOTE
FOR SKYLUX-G4/SL/SP AND BENZINA-G2
Microwave Motion Sensor
(HIGHBAY-MS)
DAYLIGHT PRIORITY
1. Rotate the sealing cover (cap) counter-clockwise
until it cannot be rotated any further. Pull it outwards
and remove.
With Daylight Priority Function, HIGHBAY-MS is able to
differentiate artificial light brightness from natural light after
installed inside the fixture, and automatically turn off light when
ambient brightness exceeds the preset Lux level.
Precondition of Daylight Priority:
1. Stand-by period is +∞
2. Stand-by dimming level is on 10%, 20% or 30%
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux
4. The installation should be carried out without
power supply connected. Recheck and other relevant
tests should be conducted after completion of the
installation. After correct installation, the marking
point of the Sensor shall be in the same direction as
the interface direction arrow.
2. Please store the removed sealing cover (cap) for
future use.
3. Place the plug part of the Sensor on the expansion
interface and find the only installation position through
360° rotation. When rotating to the correct position,
the module will be embedded downward. You can
also refer to the direction guide arrow, and then rotate
clockwise to complete the installation. When it cannot
rotate any further, it is locked.
INSTALLATION
