MOD. FT04 rev.01
HELP V (use and maintenance) Ed. 3 - updated: 12/2018
-
7
–
Complete the operation making the wheels of the wheelchair touch the safety stop on the front
half of the platform and then block the wheelchair using the original brakes (
Photo 13)
.
Photo 13
□
Check the right positioning of the wheelchair on the platform, push the way up button until the
position of maximum lift and then push the button to close the platform, paying attention to a
possible collision of the rear right wheel with the door (due to an incorrect positioning of the
wheelchair on the platform) (
Photo 14,15)
.
Photo 14
correct positioning
Photo 15
incorrect positioning
Moreover, on some type of small vehicle, it is necessary to pay attention to the possibility of the
collision between the head of the person and the upper part of the door sill: in these cases lower
or bend the head during the rotation.
□
Once the rotation is completed, the bumper will deactivate itself. Push the way down button until
the platform touches the floor of the vehicle, then go back with the wheelchair slowly: during this
phase the front part of the platform will lift through the springs. This operation must be carried out
with attention to avoid the kickback of the flap on the feet of the person.
Summary of Contents for HELP V
Page 1: ......
