Handy Tech
Elektronik GmbH
Easy Braille
Start-Up
Page 13
PC key(s)
Chord
commands
Emulated on the Easy Braille by
cursor key)
Next word (Ctrl + right
cursor key)
SPC + 6
Page Up
SPC + 2
Page Down
SPC + 5
Ctrl + Page Up
SPC + 3 6, SPC + 2
Ctrl + Page Down
SPC + 3 6, SPC + 5
Pos1
Chord k
SPC + 1 3
End
SPC + 4 6
Ctrl + Pos1
Chord l
SPC + 1 2 3
Ctrl + End
SPC + 4 5 6
Function Keys F1 to F12
SPC + CR1 to CR12
Left Windows key
Chord w
SPC + 2 4 5 6
Context key
Chord W
SPC + 2 4 5 6 7
Windows key + character
SPC + 2 4 5 6 8 followed by character
Lock/unlock Windows key
L + R + 2 4 5 6 8
PAUSE key
Chord p
SPC + 1 2 3 4
W PAUSE key
SPC + 2 4 5 6 8 followed by SPC + 1 2 3 4
Space bar
L or R (SPC)
Screen
Reader
key
+
character
SPC + 2 3 4 8 followed by character
Lock/unlock Screen Reader
key
L + R + 2 3 4 8
3.5 Configuration Mode
Configuration mode can be activated by holding down [3 7] for longer than 3
seconds. When the unit switches into Configuration Mode, a long signal tone sounds
and the message
'CONFIG MODE'
appears on the Braille display.
Note:
Please note that any settings you make here have a significant effect on the
operation of the Easy Braille. Make sure that you are completely certain what these
effects will be before you make any changes. All settings remain stored even if the
Easy Braille is switched off.
The keys on the Easy Braille now have the following functions (non-functional keys
are not listed):
[7]
Exit configuration mode
A short signal tone will sound. The new settings will be in force.
[3]
Switch between 6-dot display and 8-dot display
If you enter [3] once, the standard 8-dot Braille display will be replaced by
6-dot representation, e.g., dots 7 and 8 will simply be suppressed on the
display. This enables an emulated 6-dot display on the Braille modules.
