Easy Braille
Installation
Handy Tech
Elektronik GmbH
Page 8
3. Open the Control Panel and select "Bluetooth Devices" or click on the related
icon in the Notification Area. A window with the title "Bluetooth Devices"
opens.
4. On the tab "Devices", click on the button "Add...".
5. The window "Add Bluetooth Device Wizard" now opens. In this window, select
"My device is set up and ready to be found" and then click on the button
"Next".
6. The PC now searches for available Bluetooth devices and lists all such
devices it finds. This may take a few minutes. Select the desired device in this
list and click on the button "Next".
7. Now select the option "Let me choose my own passkey:", enter the five-digit
number shown on the box in which the Bluetooth adapter was packed and
then click on the button "Next".
8. The so-called pairing operation is now executed and the COM ports are set
up. This may take a few minutes. All generated COM ports are then displayed.
Now click on the button "Finish" to terminate the connection procedure.
9. The selected device now appears in the window "Bluetooth Devices". Click on
the button "OK" to close the window. The Bluetooth device has now been
connected and can be used.
You now have a wireless connection between your Easy Braille and your PC and can
use all of the functions just as if there were a cable connecting the two together.
Note:
If you move outside the maximum range of the Bluetooth connection (about 10
metres) with your Easy Braille, the connection to the PC is disabled. When you move
back into range, the Handy Tech Braille display driver automatically establishes the
connection again. In order to use this function, make sure that the latest version of
the Braille display driver is installed (see Section 2.2 Software Installation).
2.5.2 Bluetooth Connection to a Mobile Telephone
If you have a mobile telephone which uses the Symbian operating system, such as
the Nokia E50, then this telephone also has a wireless Bluetooth interface. Note that
Version 2.1 of the Braille display driver from Talks Premium is required to connect to
a mobile telephone. To establish a wireless connection between your Easy Braille
and the mobile telephone (so that you can use Talks Premium), proceed as follows:
1. In the menu "connections" of the mobile telephone, select the sub-menu
"Bluetooth". Then select the tab "Paired devices" and then "Options".
2. Select "New paired device". The accessible Bluetooth devices are then
displayed. If the message "Bluetooth is switched off. Switch on?" appears,
press "YES". Make sure that your Easy Braille is switched on and that there is
no USB cable connected to it.
3. Now select your Easy Braille from the list of accessible devices. If your Easy
Braille is not displayed, press "More devices". The entry for Easy Braille
consists of the letters EBR followed by the serial number of the device.
4. When you select your Easy Braille, you will be requested to enter the
password. The password is a five-digit number and is shown on the box in
which Bluetooth adapter was delivered together with your Easy Braille.
