Handy Home Products 16691, Instructions Manual

Page: 9 / 20

9
Monterey
10' GAZEBO
TOP VIEW
3" Screw
10' Gazebo
Ridge Block Eight
Pre-Drilled Holes
Facing Down
Rafter
Rafter
Flush
at top
Flush to Top
Keep Center Rafter
Flush to Top
Pre-drilled
hole up on
Rafter
5
ERECTING RAFTERS
❑
10 pcs. Rafters 2x4x62-3/4”
❑
4 pcs. Center Rafters 2x4x65-9/16”
❑
1 pc. Ridge Assembly from 4A
5-B
PARTS LIST 10’ GAZEBO
PARTS LIST 12’ GAZEBO
❑
12 pcs. Rafters 2x6x78-3/8”
❑
4 pcs. Center Rafters 2x6x81-1/4”
❑
1 pc. Ridge Assembly from 4A
❑
14 pcs. Rafters 2x6x92-13/16”
❑
4 pcs. Center Rafters 2x6x94-3/8”
❑
1 pc. Ridge Assembly from 4A
PARTS LIST 14’ GAZEBO
If you are assembling a 12’ or 14’ Gazebo, please begin with step 5-C, if you are assembling a 10’ Gazebo,
please go to step 5-B. Note: step 5-B and 5-C only shows the method for securing rafter to ridge assembly,
follow step 5-A for proper assembly.
BOTTOM VIEW
3" Screw
5-A
5-A: Attach rafters 1, 2, 3, 4 to Ridge as-
sembly first. Follow securing method as in
Step 5-B or 5-C. Set assembly on Gussets
and attach with 3” screws as in Step 5-D,
Fig. 2. Keep the center on these rafters
44-3/4” apart at the top and bottom. In
windy conditions, have a second person hold
this assembly in place until rafters 5 and 6
are installed. Layout and attach remaining
rafters according to 5-A for easier assembly.
Install the required rafters in the same man-
ner for 12’ and 14’ model gazebos.
NOTE: Adjust Wall corners in or out to
fit.
1
5
11 12
13 14
6
7
8
2
9
10
3
4
44-3/4"
on center
Longer
Center
Rafter
Longer
Center
Rafter
5-B: For a 10’ Gazebo, assemble Rafters (with predrilled holes
facing up) see 5-A attachment assembly by joining Rafters 1, 3
and 2,4 on opposite sides to Ridge Block (with predrilled holes
in Ridge Block facing down) secure using 3” screws through
predrilled hole in top of Rafter.
Once Rafters 1,3 and 2,4 are connected to Ridge Block, attach
two 3” screws through the bottom predrilled holes in Ridge
Block into Rafter. With help, place this assembly on top of
Gazebo Gussets where indicated. Please follow step 5-D at
this time.