background image

 

Important! 

Always 

follow 

instructions 

closely 

 

Use a single-phase AC 220~240V/50/60Hz power supply 

 

Use within the required voltage, as voltage exceeding 220V +10% will fail the unit 

Using an incorrect power supply may cause fire, electric shock and malfunction. 

 

Use separate line 

Using  any  other  electric  appliance  with  the  same  line,  may  cause  the  branch  socket  to 

become very hot and cause fire. 

 

Turn off the power switch before inspecting and cleaning the unit 

Otherwise, may cause electric shock. 

 

earth 

grounding connection 

 

Ensure the unit is properly grounded 

Otherwise this may cause electric shock during malfunction or a short circuit. 

 

Installation work should be done by the qualified technician. 

Incorrect wiring connection can cause electric shock and fire 

 

Be sure to install a residual current circuit breaker 

Otherwise, this may cause electric shock 

 

Use a type whose contact points are at least 3mm apart 

Please use the product of CCC standard. 

Recommended residual current circuit breaker (for ground-fault protection). 

(use  a  single-phase  2-line,  AC  220  ~  240V/50/60Hz  cable  with  a  20A  rated  current, 

15mA-type rated operating current) 

 

Prohibited 

 

Do not let children hang from the unit.     

 

Otherwise, this may cause the unit to drop. 

 

 

Important! 

Follow instructions 

 

 

Always use the unit with the drain tank and air filter attached 

Once water enters the unit inside, short circuit or electric shock occurs. 

 

Wear gloves when inspecting and cleaning the unit 

Otherwise ,this may cause injury 

 

If the unit does not start or works abnormally, turn off the power switch and ground 

fault breaker and contact your dealer for inspection and repair. 

Otherwise, this may cause electric shock or fire due to short circuit 

 

Summary of Contents for Gorillo












Reviews: