Spray ball
09513, 09514, 09515, 09516, 09517
BA_009500.03_EN
2019-03-05
Albert Handtmann Armaturenfabrik GmbH & Co. KG
6 / 6
4.2
Operation
Pos : 15 /T echnisc he Dokumentation/ Betriebsanl eitungen/M ontag e, Betrieb, Wart ung/ Betrieb/09500/ Betriebs hinweise 95000 @ 4\ mod_1551779581698_20. doc x @ 34628 @ @ 1
CIP:
•
Tank diameter should be smaller than the spray circle diameter.
•
Chose spray ball capacity from the table.
•
Liquid pressure at the spray ball 1,5 - 2,0 bar.
•
Cleaning time depending on contamination level.
•
Cleaning temperatures acc. to operating conditions.
•
Draining of the detergents has to be guaranteed.
WARNING
Warning – General dangers!
Splash hazard by caustic, acid and other media
–
Do not open tank/vessel during CIP.
Pos : 16 /T echnisc he Dokumentation/Ü bers chrift en/ 1. 1/ War tungshi nweis e @ 0\ mod_1215765605303_20. doc x @ 653 @ 2 @ 1
4.3
Maintenance
Pos : 17 /T echnisc he Dokumentation/ Betriebsanl eitungen/M ontag e, Betrieb, Wart ung/ Wartung/ 95000/ Wart ung 95000 @ 4\ mod_1551780417185_20.doc x @ 34637 @ @ 1
Basically, the spray balls are maintenance-free (material stainless steel)
CAUTION
Caution – damage to components!
However, due to mineral sediments or insufficient water quality, a reduction of the bore
hole cross sections is possible.
–
Any maintenance only at depressurized system.
–
Maintenance if necessary, at least once a year.
–
During maintenance pay attention to the assembly and safety instructions.
=== Ende der List e f ür T ext mar ke I nhalt ===