H&S WIDE BODY, Operator'S Manual And Parts List

Page: 9 / 30

W A R N I N G
TO PREVENT SERIOUS INJURY OR DEATH ;
BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING
INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS
WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE
SAFETY PRECAUTIONS. KNOW HOW TO STOP UNLOADING MECHANISM BEFORE STARTING IT.
If the machine becomes clogged, disengage truck or tractor hydraulics, stop the truck or tractor
engine, and allow all mechanisms to stop before cleaning or working on the machine.
DO NOT attempt to perform maintenance or repair with truck or tractor running and hydraulics hooked
to the power source.
DO NOT step up on machine at any time.
DO NOT get off the tractor when box is in operation. Operator position is in the tractor seat.
(Running Gear, Chassis Mount). DO NOT leave truck cab when box is in operation. (Truck Mount).
DO
NOT ALLOW PERSONNEL OTHER THAN THE QUALIFIED OPERATOR NEAR THE MACHINE. DO
NOT allow minors to operate or be near the machine.
STAY CLEAR of rear of
Forage Box at all times.
DO NOT clean, adjust, or lubricate the machine when any part is in operation.
BE SURE the machine is clear of people, tools, and other objects before engaging hydraulics.
NEVER start power box until all guards and safety shields are secured in place.
STAY CLEAR of hydraulic lines, they may be under extreme pressure or heat.
Loose or floppy clothing should not be worn by the operator.
CAUTION – BEWARE OF LOW ELECTRICAL WIRES.
H&S Mfg. Co. always takes the operator and his safety into consideration and guards exposed moving
parts for his protection. However, some areas cannot be guarded or shielded in order to assure proper
operation. In addition, the operators manual and decals on the machine itself warn you of further danger
and should be read and observed closely.
Study The Above Safety Rules
ATTENTION - BE ALERT - YOUR SAFETY IS INVOLVED
-7-
TRACTOR:
This Operators Manual uses the term "Tractor" when identifying the power source.