![background image](http://html1.mh-extra.com/html/hands/top-shot-5215/top-shot-5215_operators-manual_3121653034.webp)
LUBRICATION
-32-
DRIVE CHAINS
The drive chains are lubricated by the optional automatic chain oiler. Any time that the discharge door is
raised, a specified amount of oil is sent to the brushes on each of the chains. The oiler is adjustable to
set the amount that is being discharged. This will extend the life of the drive chains. Keeping the chains
aligned with sprockets will also lengthen the life of the sprockets and drive chains.
The discharge gate control
cylinder shaft and both front
and rear main auger cylinders
should also be frequently coated
with a rust preventative spray or
lubricant since the cylinder shaft
may remain extended when not
being used for a period of time.
CYLINDERS
The optional oiler reservoir is
located on the left front side by
the scraper and jack storage
position.
Oiler brushes on
all chains.
Summary of Contents for Top Shot 5215
