![background image](http://html1.mh-extra.com/html/hands/rr-420-evo/rr-420-evo_operators-manual_3070934014.webp)
14
The shape and colour of the labels vary based
on the rules. In addition to containing a danger or
prohibition sign, other rectangular labels provide
additional information about the safety rules that
must be observed. The rules illustrated by the
labels affixed to the equipment (
fig.10
) are as
follows:
1U - obligation
to read the use and maintenance
manual;
2U / 3U - danger of hooking or entanglement.
With rotating arms, their tines may hook on to
clothes or other objects worn by personnel in
charge;
2U / 3U - danger of flying objects.
Objects
presents in the operational field may be caught
and thrown by the tines. Keep a safety distance
of 20 m.;
4U - prohibition to stand or transit.
It is
forbidden for persons not in charge to stand or
move inside the operational area of the windrow
rotary rake, when this is running. Should it be
necessary to move inside the operational area,
keep a safety distance (20 m). Whereas, when
the rake is in transport configuration, it is better to
do attention to the tines, which being in lifted
position and then sticking out should be a danger
for who transit near the equipment;
5U (on cardan shaft) - danger
of hooking or
entanglement.
With the rotation of the shaft,
clothes or other objects worn by staff may be
hooked ;
6U -
verify that the rpm number set at the tractor
PTO output is of 540 rpm/min and that it rotates
clockwise.
IMPORTANT
The safety and instruction labels must be
replaced before they become illegible. If this
happens, the operator cannot use the carted
wheel rake until a new label is applied. Similarly it
is utterly forbidden to remove the safety or
instruction labels placed on the machine. In any
circumstances
in
which
this
occurs
the
Manufacturer disclaims all responsibility because
the machine would not meet the safety standards
with which it was designed and manufactured.
The labels similar to these present on the
equipment are available from the Manufacturer.
Call the Customer service of H&S Dealer to ask
for replacements. It is advisable, during the
equipment delivery verify the presence and the
status of the labels.
B.7 Noise levels
The device produces little noise other than that
of its moving mechanical parts and has no
motor. Therefore, the operator does not need
any acoustic protection (ear plugs, muffs, etc.).
As for the noise produced by the tractor, to
consult the proper operator’s manual.
B.8 Residual risks
-
Injury of lower limbs and/or bodily: loss of
stability when parking caused by the missed
installation of the bearing foot.
Summary of Contents for RR 420 EVO
