H&S LW1100, Operator'S Manual

Page: 16 / 40

SET-UP & ASSEMBLY
NOTE: Determine right or left side of the LINEWRAP by viewing it from the rear. If instructions or
parts lists call for hardened bolts, refer to bolt torque chart.
1. Assemble the LINEWRAP and check for proper assembly and adjustment. Make sure that all
bolts are tightened.
2. Attach the wheels with tires, using the lug nuts furnished and torque the mounting hardware to
80 ft./lbs. o f torque. Check wheel bolts periodically thereafter.
3. Check tires and inflate to the recommended pressure. (11L x 15 to 36 pounds)
4. Check the hydraulic oil level of the reservoir tank. Fill to the full level if needed (See Lubrication
Chapter in This Manual).
5. Lubricate the LINEWRAP completely (See Lubrication Chapter in This Manual).
-14-