H&S HD 7+4, Operator'S Manual / Parts Book

Page: 19 / 56

-1 7 -
ADJUSTMENTS
MAIN APRON
Main feeder apron adjustment bolts are located behind the convenient access door located in the
bottom portion of rear tailgate .Remove handle nuts (A) to open access door and swing door
downward .
All apron chains must be taken up evenly before you use the forage box .Check again after the first
few loads .The Main Feeder Aprons should be at proper tension at all times .Tighten the full threaded
bolts (B) to adjust aprons .Aprons are properly adjusted when two Cross Slats, or about three feet of
chain lift off the Chain Return Slides from the rear of the box .Maintain this tension when operating the
box .
B
A