H&S H D TWIN AUGER, Operator'S Manual / Parts Book

Page: 33 / 54

-22-
INSTRUCTIONS FOR ORDERING PARTS
All service parts should be ordered through your authorized H&S dealer. He will be able to give you faster
service if you will provide him with the following.
1. Model & Serial Number - Both can be located on the front, center of your unit.
2. All reference to left or right apply to the machine as viewed from the rear.
3. Parts should not be ordered from illustration only. Please order by complete part number.
4. If your dealer has to order parts - give shipping instructions.
VIA truck - large pieces (please specify local truck lines)
VIA United Parcel Service (include full address)
PLEASE RECORD NUMBERS FOR YOUR UNIT FOR QUICK REFERENCE
ABOUT IMPROVEMENTS
H&S IS CONTINUALLY STRIVING TO IMPROVE ITS’ PRODUCTS.
We must therefore, reserve the right to make improvements or changes whenever it becomes practical to
do so, without incurring any obligation to make changes or additions to the equipment previously sold.
ITEM PART NO. DESCRIPTIONS
1. ST82 Poly Hold down and Seal Holder
2. ST2 Poly Liner for Rear Auger
3. ST3 Poly Liner for Front Auger
4. ST83 Auger Housing
5. S4 LH Side Panel
6. S5 LH Emergency Stop Panel
7. S370 Emergency Stop Panel
8. ES14 Thimble (2)
9. ES15 Cable Clamp (2)
10. S7 Spring for Emergency Stop
11. S8 Emergency Stop Cable
12. S9 RH Side Panel Top
13. ST5 RH Side Panel
14. S11 RH Emergency Stop Panel
15. S12 Gearbox Brace
16. ST84 Front Main Panel
17. ST7 LH Front Angle
18. S3 LH Side Panel Top
19. S20 Apron Side Spacer
20. PB74 Drive Shaft Panel
21. ST66 Auger Drive Shield
22. ST9 Auger Chain Shield
23. ST67 Wiper End
24. S306 Rubber Seal
25. S288 Rubber Seal Strap
26. S522 Manual Holder
30. CHM38 Plug Storage
FIGURE 1
HOUSING COMPONENTS FOR UNITS
- 31 -