![background image](http://html1.mh-extra.com/html/hands/boiler-gun-bg44/boiler-gun-bg44_operating-manual_3069453078.webp)
7. Handling and storage
Precautions for safe handling
Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing
or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke
while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or
expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when
handling the product must be grounded. Do not re-use empty containers. Avoid prolonged or
repeated contact with skin. Avoid prolonged exposure. Use only in well-ventilated areas. Wear
appropriate personal protective equipment. Wash hands thoroughly after handling. Observe good
industrial hygiene practices.
Conditions for safe storage,
including any incompatibilities
Level 3 Aerosol.
Store locked up. Pressurized container. Protect from sunlight and do not expose to temperatures
exceeding 50°C/122 °F. Do not puncture, incinerate or crush. Do not handle or store near an open
flame, heat or other sources of ignition. This material can accumulate static charge which may
cause spark and become an ignition source. Prevent electrostatic charge build-up by using
common bonding and grounding techniques. Store in original tightly closed container. Store in a
well-ventilated place. Store away from incompatible materials (see Section 10 of the SDS). Keep
out of the reach of children.
8. Exposure controls/personal protection
Occupational exposure limits
U.S. - OSHA
Value
Components
Form
Type
PEL
5 mg/m3
Oil mist
Distillates Petroleum,
Hydroteated Light (CAS
64742-47-8)
PEL
5 mg/m3
Oil mist
Petroleum Oil (CAS
64742-52-5)
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Value
Components
Type
PEL
9000 mg/m3
Carbon Dioxide (CAS
124-38-9)
5000 ppm
ACGIH
Value
Components
Form
Type
TWA
5 mg/m3
Oil mist
Distillates Petroleum,
Hydroteated Light (CAS
64742-47-8)
TWA
5 mg/m3
Oil mist
Petroleum Oil (CAS
64742-52-5)
US. ACGIH Threshold Limit Values
Value
Components
Type
STEL
30000 ppm
Carbon Dioxide (CAS
124-38-9)
TWA
5000 ppm
US. NIOSH: Pocket Guide to Chemical Hazards
Value
Components
Type
STEL
54000 mg/m3
Carbon Dioxide (CAS
124-38-9)
30000 ppm
TWA
9000 mg/m3
5000 ppm
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
3 / 9
Material name: LPS® 2 (Aerosol)
729 Version #: 01 Issue date: 09-22-2014
SDS US
Page 66
BG44 Boiler Gun Operating Manual
Summary of Contents for BOILER GUN BG44
