![background image](http://html1.mh-extra.com/html/hands/boiler-gun-bg44/boiler-gun-bg44_operating-manual_3069453031.webp)
P/N 100190, Rev. 1
Page 19
3.4
I
NSTALLING
THE
CUTTING
TOOLS
Do the following to install the cutting bit(s):
1. Advance the tool holder towards the workpiece
to help with alignment of the cutting bit(s).
2. On a fixed tool holder:
a) Loosen the set screw for the cutting tool
slot.
b) Fully insert the cutting bit into the slot
with the beveled cutting edge facing the
direction of rotation.
c) Tighten the set screw(s).
3. On a sliding tool holder:
a) Loosen the set screws in the blade locks.
b) Slide the cutting bit into the channel with
the beveled cutting edge facing the direc-
tion of rotation.
c) Align the cutting edge of the tool to cut
the full width of the workpiece wall.
4. Tighten the set screw(s) to secure the cutting
bit(s) to the tool holder.
5. If using two blades, install the second blade
opposite (180°) to the first. Orientate the bev-
eled cutting edge facing the direction of rota-
tion.
T
IP
:
The BG44 Boiler Gun can be operated
with one blade. Smoother operation on
harder materials or thicker pipe walls
will result with the use of two blades.
F
IGURE
3-10. F
IXED
(L)
AND
SLIDING
(R)
TOOL
HOLDERS
WITH
CUTTING
BITS
.
F
IGURE
3-11. C
UTTING
BIT
INSTALLED
Summary of Contents for BOILER GUN BG44
