LUBRICATION GUIDE
GREASE FITTINGS
There are numerous grease fittings on the rake. Lubricating properly and often enough will prolong the life
of your rake. Grease daily during normal use and
before and after storage and after power washing.
Use a good grade of high quality grease. Make sure that grease comes out around the shaft on sleeve
type bearings. Wipe off excessive grease to prevent accumulation of chaff or grit around the bearing.
-20-
One on
the pivot
of each
Gauge
Wheel
One on the
backside of
each Transport
Wheel Hub
One on each
L.H./R.H. Rake
Arm Beam Pivot
Linkage
Pivot
Points
Linkage
Pivot
Points
Summary of Contents for 7116
