H&S 7116, Operator'S Manual

Page: 16 / 36

SET-UP & ASSEMBLY
NOTE:
Determine the right or left side of the wheel rake by viewing it from the rear. If instructions
or parts lists call for hardened bolts, refer to the Cap Screw Torque Value Chart.
1. Assemble the rake or check the rake for proper assembly and adjustment. Make sure that all
bolts are tightened.
2. Attach the wheels with tires, using the lug nuts furnished and torque the mounting hardware to
95 ft./lbs. of torque. Check wheel bolts periodically thereafter.
3. Check tires and inflate to the recommended pressure. (IF240/80R15IMP to 35 pounds)
4. Lubricate the rake completely (See Lubrication Chapter in This Manual).
-14-