H&S 6128, Operator'S Manual

Page: 7 / 46

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Merger has been completely set-up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as
you have made the proper adjustments and found the item operating satisfactorily.
(Remove Dealers File Copy
At Perforation)
Model Number
Serial Number
Dealer’s Name
Inspection Date
Signature of Pre-Delivery Inspector

Merger was not damaged in shipment. Check for dents and loose or missing parts. Report
damage immediately to H&S Manufacturing Co., Inc.

Merger has been correctly assembled according to instructions in this manual. Wheel
nuts and all other fasteners are tightly secured.

All bolts and fasteners are tight.

All grease fittings have been lubricated. See LUBRICATION section of this manual for
details.

Hoses and fittings are properly attached and there are no visible leaks.

All belts are at proper tension.

PTO Shields turn freely.

All shields and guards are in place and fastened.

All mechanisms are operating trouble free.

Tires are inflated to correct pressure.

Decals are in place and legible.
DEALER PRE-DELIVERY CHECK LIST
-5-