background image

-3-

H&S WARRANTY

H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in material and           

workmanship. Except as noted below, this warranty term is twelve (12) months on parts and labor, and 

twenty-four (24) months on parts only from the date of delivery of the product to the original purchaser by 

an authorized H&S dealer. Under this warranty, H&S will repair or replace, at its option, any covered part 

which is found to be defective in material or workmanship during the applicable warranty term. In no case 

will the covered repair cost of a part or parts exceed the replacement cost of that part. In no case, unless 

pre-authorized by H&S, will a component be replaced versus repaired unless the cost of labor and parts 

exceeds 75% of the cost of a new component.  Warranty repairs must be performed by H&S or a dealer 

authorized by H&S to sell and/or service the product involved, and will use only new or remanufactured 

parts or components furnished by H&S. Any warranty repairs needing to be performed by a third party 

must be pre-authorized by H&S. Standard freight costs will be covered by H&S for any part used to make 

a warrantable repair, any form of express freight will not be covered unless pre-authorized by H&S. This 

warranty includes approved parts and labor to repair the product but does not include, and the purchaser 

is responsible for, any service call and/or transportation of the product to and from the dealer’s place of 

business, for any costs related to travel, for any premium charged for overtime labor requested by the 

purchaser, and for any service work not directly related to any defect covered under this warranty. 

This warranty includes only those components of the product manufactured by H&S. Warranty for 

any  component  not  manufactured  by  H&S  including,  but  not  limited  to,  engines,  batteries,  tires,  rims,               

hydraulic motors, pumps, etc. are covered by the warranty, if any, provided separately by their respective 

manufacturers. H&S reserves the right to request the return of any failed component. 
This warranty in all its parts is extended solely to the original purchaser of the product, is terminated upon 

any subsequent transfer or sale from or by the original purchaser, and extends no third party benefits or 

rights whatsoever.

The warranty term for any product used in any for hire, rental fleet or rental application, is limited to six 

(6) months from the date of delivery of the product to the original purchaser by an authorized H&S dealer.

This warranty does not include: (1) Any product that has been altered or modified in ways not approved 

by H&S; (2) Depreciation or damage caused by normal wear, use for which the product was not de-

signed, misuse, improper or insufficient maintenance, improper operation, accident or failure to follow the 

product Operator’s Manual recommendations and product decal recommendations; (3) Normal mainte-

nance parts and service; (4) Repairs made with parts other than those available from H&S or performed 

by anyone other than H&S or a dealer authorized by H&S to sell and/or service the product involved.
To secure warranty service the purchaser must report the product defect to a dealer authorized by H&S 

to sell and/or service the product involved within the applicable warranty term together with evidence of 

the warranty start date and make the product available to that dealer within a reasonable period of time.

For these warranty terms to be in effect the selling authorized H&S dealer and/or the customer must 

submit the warranty registration to H&S.

 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF 

THIS WARRANTY. H&S and the companies affiliated with it make no warranties, representations, or 

promises, express or implied, as to the performance or freedom from defect of its products other than 

those set forth above and NO IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS OR FITNESS 

FOR A PARTICULAR PURPOSE IS MADE. IN NO EVENT WILL THE DEALER, H&S OR ANY COM-

PANY AFFILIATED WITH H&S BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. The 

ONLY REMEDY the purchaser has in connection with the breach of performance of any warranty on H&S 

products are those set forth above.
The selling dealer has no authority to make any representation or promise on behalf of H&S, or to modify 

the terms or limitations of this warranty in any way.
12/20/22

Summary of Contents for 3243





































Reviews: