USING RANGER
HANDSFREEFARM.COM
14
To drive an A=B line:
1. Position the vehicle at the beginning of the first pass.
2. Press
Straight
. Set New AB Pt is selected (preceded by ‘>’).
Note: If this is the first time using RANGER or if you have erased
memory, only ‘Set New AB Pt’ appears and is selected. Otherwise,
‘Use Previous’ appears above ‘Set New AB Pt’ and is selected. Press
the down arrow to select ‘Set New AB Pt’.
3. With Set New AB Pt selected, press
ENTER
.
4. Press the
ENTER
button to mark Point A.
5. Drive the first pass, then at the end of the pass press
ENTER
to mark
Point B. Upon marking Point B, RANGER automatically begins
guiding and the screen indicates you are on pass 0 (zero).
6. Turn around and drive toward the next pass. RANGER auto-detects the pass and begins guiding.
The steering guide indicates if you are centered on your pass (vertical yellow LEDs) or if you need to steer
left or right to become centered on your pass (red LEDs on left = steer to left; green LEDs on right = steer
to right).
The crosstrack bar indicates the pass is a certain distance left (red LEDs on left) or right (green LEDs on
right) of your vehicle. As you steer toward your pass, fewer crosstrack LEDs are illuminated and when you
are centered on your pass the center crosstrack LED is illuminated.
7. When you have finished your field press
STOP Guidance
to stop guiding (stop logging data). You are
done, so you can press
MENU
to return to the ‘Ready’ screen.
Steering guide
(illuminated LEDs indicate direction
you need to steer to become
centered on pass)
Crosstrack
(illuminated LEDs show pass is certain
distance left or right of your vehicle)
Example - need to steer right
Summary of Contents for RANGER
Page 1: ...User Guide...
Page 2: ...PN 875 0416 01 Rev A...
Page 23: ......
Page 24: ...www handsfreefarm com...
