GB
86
TILE
Upper side stone
H26T Low/H26K Low
TILE
Upper front
profile
TILE
Upper front stone
Secure screws into the
upper front stone leaving
4-5 mm between the screw
flange and the soapstone.
Hang the stone into place in
the keyholes and allow it to
rest against the bent edge
of the side profile. Check
that it is at the same height
as the side stones and then
tighten the screws.
Screw the upper front profiles
securely into place in the side stones.
Press the profile upwards so that its
bent edge is against the lower edge of
the side stone.
Secure screws into the
upper side stones leaving
4-5 mm between the
screw flange and the
stone. Then insert them
into the smaller keyholes
in the side profiles and
check that they are level
before finally tightening
the screws.
