Handlink WG-500P 24Roam, User Manual

Page: 69 / 91

WG-500P Hotspot in a Printer
Item Default Description
General Settings
ESSID Wireless The ESSID’s name by default is “ Wireless” . It is
case sensitive and must not exceed 32 characters.
Broadcast Enable Broadcast or Hide the ESSID
Wireless
Connection Enable Enable or Disable wireless connection.
Country ETSI Select the desired country code. The options are
FCC and ETSI.
Channel 6 Select the channel ID for wireless connection.
802.11 Mode
802.11n+802.
11g+802.11b
Select the 802.11 mode of following: ：
-802.11n+802.11g+802.11b
-802.11n+802.11g
-802.11g+802.11b
-802.11n only
-802.11g only
-802.11b only
Channel
Width
：
Security Settings
Security Open Select Open to allow wireless station to
communicate with the device without any data
encryption. Select WEP/ WPA / WPA2 / MixMode
for data encryption.
WEP Key 1
This selects which of the Keys the In Wall Box
Access Point uses when it transmits. You can
change the selected encryption key every now and
then to increase the security of your network.
Note: You have to configure all WEP keys (1~4),
and select one of the four WEP key.
Enter 5 characters (case sensitive) for ASCII
64-bit WEP Key.
Enter 10 characters (case sensitive) for Hex 64-bit
WEP Key.
Enter 13 characters (case sensitive) for ASCII
128-bit WEP Key.
Enter 26 characters (case sensitive) for Hex
128-bit WEP Key.
68