Handlink WG-500P 24Roam, User Manual

Page: 41 / 91

WG-500P Hotspot in a Printer
3-2-1-5 SNMP
The SNMP Agent Configuration screen enables you to access to your device via
Simple Network Management Protocol. If you are not familiar with SNMP, please
consult your Network Administrator or consult SNMP reference material. You must
first enable SNMP on the SNMP Agent Configuration screen.
Figure 3-2-7 SNMP Setting Screen
Item Default Description
SNMP Disable Disables or enables the SNMP management.
SNMP Port 161 If the SNMP enables, also allowed to specific the SNMP
port number via NAT. The allowed SNMP port
numbers are 161(default), 16100-16199 and Trap
port numbers are 162 (default), 16200-16299. This
Port setting is useful for remote control via NAT
network.
Trap Port 162
Configuration
Community
Name
public/private Every unit with SNMP enable must be configured to
recognize one or more community names up to 20
characters. The default setting for the community of
entry 1 is “public” and for the entry 2 is “private” and
others are empty.
NMS
Address ANY The address of the NMS. The default settings for the
NMS
Networking are “ANY”.
Privileges Read/Write Choose “Read”, “Write”, “Trap Recipients” and “All”
40