Handicare SystemRoMedic RiseAtlas625 Manual Download Page 10

Page: 10 / 48

h. Hand control input plug,

The hand control connects to the hand control input plug and it is a integrated part of bottom plate. Please see chapter
9.4 for replacement.

i. Emergency stop,

The emergency stop device shuts off power between battery and PCB when activated. It also functions as an electrical
emergency lowering when pulled out. See component list, chapter 10, for replacement.

j. Battery,

The battery of the RiseAtlas is a 24VDC NiMH environmental friendly battery with 3,2 Ah capacity. Please see chapter
9.2 Test and/or replace battery.

k. Fuse,

Bought separately, use only 20A.

l. Night lamp,

By pressing the ON-button for 3 seconds the night lamp will start. Integrated part of bottom plate, please see
chapter 9.4 for replacement.

3. Mechanical system

a. Lift strap w. guiding,

Please see chapter 9.5 for replacement.

b. Motor w. chassis,

See component list, chapter 10, for replacement.

c. Transfer motor w. transmission,

Separate document.

4. Charger

The charger is a separate item and detailed function is
described on the back side of the charger.

Always delivered with the parts for hand control charging.

S E R V I C E M A N U A L System

RoMedic

Summary of Contents for SystemRoMedic RiseAtlas625

















































Search results

Summary of Contents for SystemRoMedic RiseAtlas625

Reviews:

Related manuals for SystemRoMedic RiseAtlas625

Brands by name

Popular brands

Handicare SystemRoMedic RiseAtlas625, Manual

Search results

Summary of Contents for SystemRoMedic RiseAtlas625

Reviews:

Related manuals for SystemRoMedic RiseAtlas625

Brands by name

Popular brands