Handicare PUMA KINETIC, Service Manual

Page: 20 / 99

Adjustment options
20 Version 2011v1
2.5.1 Adjusting the angle of the footplate
•
See fig. 010506010.
The angle of the footplate can be adjusted with respect to the
lower leg in steps of 5°.
The angle of the footplate should be adjusted as follows:
•
Loosen locking nut (A) with a large screwdriver.
•
Then loosen the Allen bolt (B) on the inside of the
footplate (C), with an Allen key with a key width of 6
mm, so far that the teeth of the hinge come
completely free. Now the footplate can be freely
adjusted.
•
Adjust the desired angle of the footplate and push
the hinge manually together again.
•
Tighten the Allen bolt securely.
•
Lock the Allen bolt with the locking nut.
XXXXXX-010506010.en.doc
2.5.2 Adjusting the depth of the footplate
•
See fig. 010506020.
The depth of the footplate can be adjusted in two different
positions. For this the left and right footplate should be
exchanged.
The exchanging of the footplates should be done as follows.
•
Remove the calf strap. See 'Removing calf strap'.
•
Loosen the set bolt (A) a few turns with an Allen key
with a key width of 4 mm.
•
Let the footrest (B) lower together with the profile (C)
from the top tube (D).
•
Exchange both footplates for each other and slide
them into the top tubes.
•
Adjust the footplates to the desired height.
•
Tighten the setscrews.
•
If necessary readjust the angle of the footplate, see
'footplate angle adjustment'.
XXXXXX-010506020.en.doc
C A
B
010506010
A
C
B
D
010506020