Handicare MilkyWay SystemRoMedic Handbook Download Page 59

Page: 59 / 67

MilkyWay

MilkyWay Handbook • Version 3 - 20140616 © Handicare AB

50400158

Rail 64

Rail 120

Rail 160

50400155

50400316

50400154

For use in combination with:

9: Wall fixtures - brackets and vertical supports / 59

9.5: Wall bracket parallel (plaster), 50400160

Application: Rail systems with full room coverage. For plasterboard walls.
The shown mounting can be used on high quality plasterboard walls provided that the fitter uses the correct anchors.

Minimum requirements are:
• Rigid connection between wall and ceiling.
• Double layer plasterboard bonded.

35 Nm

A For detailed information about maximum free span and overhang for different rail profiles installed on different types of ceilings

and walls using different types of fixtures, please consult the ”MilkyWay Technical information” document; Span details.

For more information about MilkyWay; available parts, article numbers and

technical data, please consult the “MilkyWay Technical information” document.

Summary of Contents for MilkyWay SystemRoMedic




































































Search results

Summary of Contents for MilkyWay SystemRoMedic

Reviews:

Related manuals for MilkyWay SystemRoMedic

Brands by name

Popular brands

Handicare MilkyWay SystemRoMedic, Handbook

Search results

Summary of Contents for MilkyWay SystemRoMedic

Reviews:

Related manuals for MilkyWay SystemRoMedic

Brands by name

Popular brands