MilkyWay
MilkyWay Handbook • Version 3 - 20140616 © Handicare AB
6: Connecting to power supply / 45
4) On the plastic piece that will be attached, remove the self tapping screw (T10) which holds the sheet
metal plate on the side without the thin plastic frame and use it to attach the ring cable shoe (incl. cable)
and the sheet metal plate that was released in step 1, as seen in fig. 4.
5) Attach the plastic part using the bolts (HK5) and holes from step 2, making sure that the cable goes
smoothly through the slot between the cover plate and the plastic piece.
5) Follow steps 1-5 for charging the plastic piece on the other side of the rail to complete the adjustment,
making the turntable ready to use.
figure 4
figure 5
