Handicare Exigo 20, User Manual

Page: 14 / 36

14
A
C
B
MB3196-EN
Adjusting the height of the front
of the seat
Figures 24 and 25
When adjusting the height of the seat, you
should adjust the height of the front castor
wheels before you adjust the angle.
Move to another position in
the castor wheel fork
Figure 24
• Undo the screw in the hub of the castor
wheel fork
• Move the wheel up or down
• Retighten the screw
Adjusting the angle of the front
castor wheel
Figure 25
• Undo the screw (25A) a little
• Undo the screw (25B)
• Insert the Allen key into the turning
wheel (25C) and turn it to the desired
angle (see the scale)
• Tighten the screw (25B). Thread lock,
such as Loctite Blue No. 243, may be
used. Then tighten the screw (25A)
If the front castor wheel is at the correct
angle, the bearing housing will be vertical
and at 90° to the floor. You can achieve this
by using a right angle or set square against
the bearing housing and floor.
Figure 24
Adjusting the wheelchair
Figure 25